BUNDUTEC - Made in South Africa. Home of the original roof top tent

BunduAwn

About

image3

The BunduAwn standard sizes are 2.45, 2.75 and 2.95 m, which is the length of the back plate.


You can order a custom sized awn of up to 4m long


If you already have a BunduTop installed and want to mount your awning to the tent, you will purchase a 2.45.


The top of the awn is covered with an aluminised spray which reflects heat away and we have found a 3-5 degree difference in temperature when tested.


The awning weighs about 20 kgs.


Open one side of the awning first, and then the second. Opening both at the same time will result in damage.


The 360 awn has been designed to not need support poles.


The L shapes ALL need an additional pole to strengthen the design.


We do, however, suggest that you tie the awning down or close it up in poor weather conditions or if you will be absent from your campsite.


The awning works with five to six arms which, when open, allows coverage of two or three sides of your vehicle.


PLEASE NOTE that when using it for the first, time that the canvas can be stiff.


It gets coated with various resins to ensure its longevity and UV qualities, so when first operating the canvas has no “memory” of how to fold.


After a couple of uses, the canvas will evolve a “memory” of how to fold and the folding will become neater and easier as time passes.


The initial folding process will seem stiff but with time it will ease into its shape and fold neatly.


Please tie down the ropes in bad weather or when leaving the Awn unattended.

Do not open both arms at the same time as this will result in damage.

BunduAwn

Combi's & Trailers

Awn to Tent Mount

Side Panels


Various Profiles

Standard 360

The Standard 360

BunduTec-BunduAwn-Standard-360

We call this awn the 360 because it wraps around your vehicle.


It comes in a 2.45, 2.75 and a 2.95 size.


Each arm has guy ropes to tie down in poor weather.


We HIGHLY recommend this profile, since the design works in triangles.


The forces spread over the triangle design gives it more rigidity and strength.



The Standard L-Shape 270

BunduTec-BunduAwn-Standard-L-Shape-270

We call this awn the 270 L Shape because of its obvious shape.


It comes in a 2.45, 2.75 and a 2.95 size.


The front left arm has a support pole to give additional support since the triangular structure has been compromised.


Each arm has guy ropes to tie down in poor weather.



The L-Shape 270 Square Back

BunduTec-BunduAwn-The-Commander-Square-Back


We call this awn the 270 L Shape Square back because of its obvious shape.


It has an additional triangle stiched in to make it sqare at the back.


It comes in a 2.45, 2.75 and a 2.95 size.


The front left arm has a support pole to give additional support since the triangular structure has been compromised.


Each arm has guy ropes to tie down in poor weather.


It boasts:

 

  • Manual operation
  • Shade awning around all three sides of the the vehicle.
  • Additional lifter arms add 500mm of drop for increased water runoff
  • Aluminized to reflect heat away
  • Cool even in direct sunlight
  • 2.45m, 2.75 and 2.95m options
  • Full aluminum construction
  • No hot air gets trapped underneath


 

Pros and Cons

Pros:

  • Aluminised coating reflects heat away
  • Lightweight and easy to handle
  • Offers a huge surface area for more shade
  • Offers additional lifter arms for an increased angle that facilitates water run off.

Cons:

  • You have to fold the awning correctly
  • They have to be tied down in  bad weather due to the large surface area
  • BunduAwn
  • Combi's & Trailers
  • Awn to Tent Mount
  • Side Panels